Filter
Top Products
22NetBotz Appliance User’s Guide
Pelco PTZ camera controls
The Update button provides access to the Add/Update Presets display, used to specify or modify a
name for preset camera positions, and configure a tour using those camera positions, for the selected
Pelco PTZ camera.
To associate a camera position with a preset, select a preset from the list, use the arrow and zoom
controls to position the camera, and click the Set button.
To view the live video for a preset, select a preset from the list, and click the Go button.
If you remove the camera from the NetBotz appliance, its preset camera locations and tour will be
removed from the list in Advanced View. The camera will retain these preset definitions.
The following are additional camera controls for the supported Pelco PTZ (pan, tilt, zoom) cameras.
Control Name Description
Pan Left
Click and hold to pan the camera left and right. You can also use the left and
right arrow keys on your keyboard.
Pan Right
Tilt Up
Click and hold to tilt the camera up and down. You can also use the up and
down arrow keys on your keyboard.
Tilt Down
Zoom In
Click and hold to zoom in. The camera will zoom in until you release the
mouse or it will stop when it reaches maximum optical zoom. If you release
the mouse and then click and hold the Zoom In button again, the image will
magnify, but in a digital format. N
OTE: You can also use the mouse wheel to
zoom in while the pointer is on the image.
Zoom Out
Click and hold to zoom out. You can also use the mouse wheel while the
pointer is on the image.
Iris Open
Click and hold to increase the brightness.
Iris Close Click and hold to decrease the brightness.
Focus In Click and hold to bring the background into focus.
Focus Out Click and hold to bring the foreground into focus.
Point Camera
Click this button and then click and drag the mouse over the image to control
the pan and tilt functions.