Filter
Top Products
47NetBotz Appliance User’s Guide
Additional SNMPv3 fields. If you select “v3” as the SNMP version, the dialog asks for the following
information:
Specifying global SNMP settings
Click Global SNMP Settings to configure SNMP settings for scanned devices for all SNMP target
communications. The Global SNMP Settings window contains the following fields:
Item Description
User The user name for the SNMP device.
Authentication
Protocol
The authentication protocol used to access the SNMP device.
Available choices are “None”, “MD-5”, and “SHA-1”
Password/Verify The password for the user. Re-enter the password in the Verify
field. The password must be a minimum of 15 characters.
Encryption Algorithm The encryption algorithm for the SNMP device. Available choices
are “None”, “56-bit DES”, and “128-bit DES”.
Encryption Password/
Verify
The password used for the encryption protocol. Re-enter the
password in the Verify field.
Item Description
Scan interval The number of minutes between scanned target queries.
Maximum route hops The maximum number of hops recorded and saved by scanners
providing route tracing support.
Number of Device Scanners in use The number of device scanners being used.
Maximum number of Device
Scanners
The maximum number of device scanners supported by this appliance.
Device descriptions version The version of the device descriptions data file stored on the device.
Update device descriptions Scanners use a device descriptions data file to identify the System
Model, Type, and Vendor value for SNMP targets. NetBotz periodically
updates the contents of the device descriptions file to include new target
types. Click Update Device Descriptions to contact the NetBotz Web
site or browse to a local device descriptions update file and update the
content of the scanners device description file.