Filter
Top Products
SEWING
74
a
Insert the plugs for the main foot controller
into the foot controller jack and the
external port on the right side of the
machine.
* Refer to Operation Manual Addendum for detailed
instructions of connecting the multi-function foot
controller.
* Before connecting the multi-function foot controller,
be sure to assemble the controller according to
Operation Manual Addendum.
a Foot controller jack
b External port
b
Slowly depress the foot controller to start
sewing.
Pressing down on the foot controller increases the
sewing speed; releasing the pressure on the foot
controller decreases the sewing speed.
c
Release the foot controller to stop the
machine.
Sewing Reinforcement Stitches
Reverse/reinforcement stitches are generally
necessary at the beginning and end of sewing. You
can use the “Reverse/Reinforcement Stitch” button
to sew reverse/reinforcement stitches manually
(see page 15).
If the automatic reinforcement stitch is selected on
the screen, reverse stitches (or reinforcement
stitches) will be sewn automatically at the
beginning of sewing when the “Start/Stop” button
is pressed. Press the “Reverse/Reinforcement
Stitch” button to sew reverse stitches (or
reinforcement stitches) automatically at the end of
sewing (see page 81).
a Reverse stitch
b Reinforcement stitch
If the stitch which you select has a double mark
“ ” at the top of the key display, you can sew
reverse stitches by holding the “Reverse/
Reinforcement Stitch” button.
If the stitch which you select has a dot mark “ ” at
the top of the key display, you can sew
reinforcement stitches by holding the “Reverse/
Reinforcement Stitch” button.
Sewing Curves
Sew slowly while keeping the seam parallel with
the fabric edge as you guide the fabric around the
curve.
Memo
• Refer to Operation Manual Addendum for
the detailed instructions of the multi-function
foot controller.
• When the foot controller is being used, you
cannot start sewing by pressing the “Start/
Stop” button.
• The foot controller cannot be used when
embroidering.
• The foot controller can be used for sewing
utility and decorative stitches when the
embroidery unit is attached.
Memo
• The speed that is set using the sewing
speed controller is the foot controller’s maxi-
mum sewing speed.