Filter
Top Products
VARIOUS EMBROIDERING FUNCTIONS
302
f
Press to select the appliqué setting.
→ The steps for creating the appliqué piece are added
to the sewing order.
g
Fuse or stick a piece of stabilizer to the
back of the felt or denim fabric to be used
as the appliqué piece.
Note
• When is pressed, the pattern is moved
to the center. After selecting the appliqué
setting, move the pattern to the desired
position.
Memo
• To cancel the setting, press .
• If no pattern is selected, the key appears
gray and cannot be selected.
Memo
• Three steps are added to the sewing order:
appliqué cutting line, position of pattern
placement on the garment, and appliqué
stitching.
a Cutting line for appliqué
b Position of pattern placement on garment
c Appliqué stitching
Note
• An appliqué piece cannot be created if the
pattern is too large or too complicated or a
combined pattern is separated. Even if the
selected pattern fits within the embroidering
area, the entire appliqué pattern may
exceed the embroidering area when the out-
line is added. If an error message appears,
select a different pattern or edit it.
Note
• For best results, be sure to use stabilizer
material for embroidering.
a
b
c