Filter
Top Products
ERROR MESSAGES
359
Appendix
9
This message is displayed
when the machine is
retrieving a previously saved
pattern while in embroidery
edit mode.
This message is displayed
when, after selecting a
pattern, ,
, or is
pressed and the pattern is
about to be deleted.
This message is displayed
when the bobbin is being
wound, and the motor locks
because the thread is
tangled, etc.
This message is displayed
when there is a possibility
that the data for the selected
pattern is corrupted.
This message is displayed
when the buttonhole lever is
down, a stitch other than a
buttonhole is selected, and
the “Start/ Stop” button or the
“Reverse/Reinforcement
Stitch” button is pushed.
This message is displayed
when the embroidery unit is
attached and the power is
turned on with the needle in
the down position.
This message is displayed
when the selected stitch is
not available for the specific
function.
This message is displayed
when you try to recall or save
a pattern while no USB media
is loaded.
This message is displayed
when you try to use
incompatible media.