Filter
Top Products
SEWING STITCH PATTERNS
Character/Decorative Stitches
163
4
b
Attach monogramming foot “N” and sew
the pattern.
c
Compare the finished pattern to the
illustration of the correct pattern below.
d
Press , and then adjust the pattern
with the “Fine Adjust Verti.” or “Fine
Adjust Horiz.” displays.
* If the pattern is bunched:
Press in the “Fine Adjust Verti.” display.
→ The displayed value increases each time the button
is pressed and the pattern will lengthen.
* If the pattern has gaps:
Press in the “Fine Adjust Verti.” display.
→ The displayed value decreases each time the button
is pressed and the pattern will shorten.
* If the pattern is skewed to the left:
Press in the “Fine Adjust Horiz.” display.
→ The displayed value increases each time the button
is pressed and the pattern will slide to the right.
* If the pattern is skewed to the right:
Press in the “Fine Adjust Horiz.” display.
→ The displayed value decreases each time the button
is pressed and the pattern will slide to the left.
e
Sew the stitch pattern again.
* If the stitch pattern still comes out poorly, make
adjustments again. Adjust until the stitch pattern
comes out correctly.
f
Press to return to the original screen.
Memo
• You can sew with the setting screen on the
display.