Filter
Top Products
BEFORE EMBROIDERING
Embroidery
187
5
b
Press to lock all keys and buttons.
→ The entire screen becomes white, and all keys and
operation buttons are locked.
c
Raise the presser foot lever.
d
Push the black button on the presser foot
holder and remove the presser foot.
a Black button
b Presser foot holder
→ Remove the presser foot from the presser foot
holder.
e
Use the included screwdriver to remove the
screw of the presser foot holder, then
remove the presser foot holder.
a Screwdriver
b Presser foot holder
c Presser foot holder screw
→ Remove the screw and presser foot holder.
f
Position the embroidery foot “W2” on the
presser foot bar from behind.
a Presser foot bar
g
Hold the embroidery foot in place with
your right hand, and then use the included
screwdriver to securely tighten the presser
foot holder screw.
a Presser foot holder screw
Note
• Instead of simply loosening the screw, it
must be temporarily removed, while optional
embroidery foot “W” can be installed simply
by loosening the screw.
b
a
CAUTION
• Use the included screwdriver to firmly tighten
the screw of the presser foot holder. If the
screw is loose, the needle may strike the
presser foot and possibly cause injury.