Filter
Top Products
SEWING THE STITCHES
Utility Stitches
137
3
b
Attach monogramming foot “N”, and select
stitch to sew the left side of the
buttonhole.
c
Press the “Start/Stop” button to start
sewing.
d
Sew the desired length for the buttonhole
and press the “Start/Stop” button again.
e
Select stitch to sew the bar tack and
press the “Start/Stop” button.
→ The machine will automatically stop after sewing
the bar tack.
f
Select stitch to sew the right side of
the buttonhole, and press the “Start/Stop”
button to begin sewing.
g
Sew the right side of the buttonhole and
press the “Start/Stop” button again.
* Sew the right side of the buttonhole the same length
as the left.
h
Select stitch to sew the bar tack and
then press the “Start/Stop” button.
→ The machine will automatically sew off the bar tack
tie and stop when the bar tack is complete.
i
Raise the presser foot and remove the
fabric.
j
Refer to page 134 to open the buttonhole.