Filter
Top Products
How to Create Bobbin Work
7
CREATING BOBBIN WORK (EMBROIDERY)
319
i
Press .
→ The sewing screen is displayed.
j
Press , and then adjust the tension of
the upper thread.
For details on adjusting the tension of the upper
thread, refer to “Adjusting Thread Tension” on
page 233.
CAUTION
• When sewing bobbin work, be sure to select an
embroidery pattern for bobbin work. If any other
type of pattern is selected, the machine may be
damaged.
Note
• Embroidery sewing speed defaults to 350
spm when a bobbin work embroidery pattern
is selected. The Settings screen will not
allow speed to be adjusted.
Memo
• When an embroidery pattern for bobbin work
is selected, the automatic thread cutting
function is turned off. Afterward, if a pattern
other than one for bobbin work is selected,
the automatic thread cutting function is
returned to the setting that was selected
before the embroidery pattern for bobbin
work was chosen.
Note
• Since bobbin work is sewn from the wrong
side of the fabric, the pattern shown in the
screen appears as a mirror image of the
final sewn embroidery. If necessary, flip the
image to preview it. In addition, when
sewing with the thread colors shown in the
sewing screen, select a bobbin thread that
matches what is shown in the screen.
a Image shown in screen b Sewn embroidery
(Right side of fabric)
Memo
• With embroidery patterns for bobbin work,
the size and thread density cannot be
changed. In addition, the automatic thread
cutting function cannot be turned on.
Memo
• We recommend a setting between 6 and 8
for the upper thread tension.