Filter
Top Products
ERROR MESSAGES
361
Appendix
9
■ Alarm Sounds
If the operation was performed incorrectly, an alarm
sounds to indicate that an error occurred. If the
operation was performed correctly, the machine
beeps to confirm the operation.
This message appears if the
file format is incompatible
with this machine. Check the
list of compatible file formats.
(see page 40.)
This message is displayed
when the image is deleted.
This message is displayed
when you press
in the screen
other than the Utility Stitch, or
press in the
screen other than the Utility
Stitch or Character/
Decorative Stitch.
This message appears when
you try to start sewing utility
or decorative/character
stitches using the embroidery
foot with the LED pointer
attached to the machine.
This message is displayed
when the “Start/Stop” button
is pushed while the multi-
function foot controller is not
connected correctly to the
machine.
Memo
• To cancel the operation beep or to change
the volume, press , display screen
3/8, and then change the setting for
“Speaker”. See page 36 for more details.