Filter
Top Products
SEWING AN EMBROIDERY PATTERN
222
f
Apply a thin layer of adhesive or spray
adhesive to the back of the appliqué piece
and attach it to the appliqué position so that
it follows the seam of the outline.
g
Press the “Start/Stop” button.
→ The appliqué will then be completed.
h
Change the upper thread and then carry out
the rest of the embroidering.
Memo
• If the appliqué material is a lightweight
fabric, you may want to use a fusible web on
the back to stabilize the fabric and for
appliqué placement. Fuse appliqué in place
with an iron.
Do not remove fabric from the frame to iron
the appliqué material.
Memo
• Some patterns may not show all three appli-
qué steps. Sometimes the “APPLIQUE” step
will be shown as a color.
Memo
• Some glue may get onto the presser foot,
needle, and needle plate at this time. Finish
embroidering the appliqué pattern and then
clean away the glue.
• For best sewing results clip all threads
between color steps.