Filter
Top Products
ADJUSTMENTS DURING THE EMBROIDERY PROCESS
230
If the Thread Breaks During
Sewing
a
Press the “Start/Stop” button to stop the
machine.
b
If the upper thread is broken, redo the
upper threading. If the bobbin thread is
broken, press and follow the
directions in steps
a through e from the
previous section to reset the bobbin.
c
Press .
d
Press the “Presser Foot Lifter” button to
lower the presser foot.
e
Press
→ The camera view window appears.
f
Press , , or to move the
needle back the correct number of stitches
before the spot where the thread broke.
* If you cannot move back to the spot where the
thread broke, press to select the color and
move to the beginning position of that color, then
use , , or to move ahead to
slightly before where the thread broke.
* Press to enlarge the image in the screen.
* Press to remove “ “ from the screen.
g
Press to close the camera view
window.
h
Press to return to the original screen.
i
Press the “Presser Foot Lifter” button to
lower the presser foot, and press the “Start/
Stop” button to continue sewing.