Filter
Top Products
SEWING THE STITCHES
Utility Stitches
151
3
g
Place the fabric under the presser foot.
h
Move the fabric to the desired position for
edge sewing. Position the fabric so that its
edge is as straight as possible.
a Fabric
i
Check that the built-in camera is correctly
detecting the fabric.
* Press to change the colors of the fabric edge
indicator line and starting point according to the
color of the fabric. Each press of this key changes
the color of the fabric edge indicator line to red
(with a blue starting point), blue (with a black
starting point) or black (with a red starting point).
a Key for changing the color of the fabric edge
indicator line
b Fabric edge indicator line
Note
• Before pressing , install the vertical
stitch alignment foot “V” and position the
edge sewing sheet; otherwise, the built-in
camera cannot detect the fabric.
If is pressed before the edge sewing
sheet is positioned, the message shown in
step
f appears again.
• After pressing , do not place your
hands or any other object near the needle
plate until the message “Recognizing...”
disappears.
Note
• When pinning the fabric, insert the pins as
shown below. If the head of the pin extends
off the edge of the fabric, the fabric may not
be correctly detected.
a Basting pin
a
b