STP-H600/H1000 Series Instruction Manual
PRECAUTIONS
1) No part of this manual may be reproduced in any form by any means without prior
written permission from Seiko Instruments.
2) Seiko Instruments pursues a policy of continuing improvement in design and
performance of this product. The right is, therefore, reserved to vary specifications and
design without notice. Understand that the product you purchased and its contents
including specifications described in this manual may differ.
REQUEST
If you find inaccuracies or errors in this manual, advise your nearest sales representative
office of Seiko Instruments or the following sections of them:
Seiko Instruments Inc.
Sales Office (Japan)
Seiko Instruments Inc. Vacuum Innovative Products Sales Department
1-8 Nakase, Mihama-ku, Chiba-shi, Chiba 261-8507 JAPAN
Telephone: <Vacuum Innovative Products Sales Department, Direct>
Domestic 043-211-1401
International + 81-43-211-1401
Facsimile: Domestic 043-211-8075
International + 81-43-211-8075
Manufacturer, Sales Office (Japan)
Seiko Instruments Inc. Vacuum Innovative Products Division
4-3-1 Yashiki, Narashino-shi, Chiba 275-0004 JAPAN
Telephone: <Vacuum Innovative Products Service Section, Direct>
Domestic 047-475-3123
International +81-47-475-3123
<Company main>
Domestic 047-475-3111
International +81-47-475-3111
Facsimile: Domestic 047-471-1544
International +81-47-471-1544
Copyright 2001 Seiko Instruments Inc. All rights reserved.
Vacuum Innovative Products Sales Department
1-8 Nakase, Mihama-ku, Chiba 261, Japan
Telephone: + 81-43-211-1401(Direct)
Facsimile: + 81-43-211-8075
6