Filter
Top Products
STP-H600/H1000 Series Instruction Manual
3.3.2 STP Pump Installation Positions
The STP pump can be installed vertically, horizontally, upside-down and slanted.
STP Pump
Upside-down
Horizontal
Slanted
Vertical
Figure 3.3 STP Pump Installation Positions
When installing the STP pump in a horizontal or slanted position, it is
recommended to install it so that the direction of the outlet port is on a vertical or
horizontal plane in the direction of the gravity.
This makes it possible to reduce the load on the magnetic bearing and the heat
generated by the STP pump.
Outlet Port
Outlet Port
Outlet Port
Outlet Port
Direction of Gravity
Figure 3.4 Positions of the Outlet Port on the Horizontally or Slanted Installed STP Pump
3-7