Filter
Top Products
STP-H600/H1000 Series Instruction Manual
WARNIN
G
Check the properties of the gas to be used, referring to the Material Safety Data Sheet
(MSDS) you obtain from the gas supplier. Follow any and all safety precautions and/or
recommendations instructed by the gas supplier.
Take appropriate measures specified in the MSDS to prevent a problem if you use any
corrosive, reactive, flammable or other system gas. Dilute the pumped gas with a monitored
inert gas if necessary. Take appropriate measures so as not to cause a problem due to the
pumped gas
The STP pump is provided with a high-speed rotor. Secure the STP pump according to the
specified method. Failure to do so may lead to serious personal injury, product and/or
peripheral equipment damage if any abnormality/error occurs in the rotor.
The STP pump operates at high temperatures while the baking heater is in operation.
NEVER touch the STP pump and its peripheral equipment while the baking heater is in
operation.
Operators can burn hands.
Always exhaust residual gases thoroughly from the STP pump when removing the STP
pump from the vacuum equipment. Residual gases in the STP pump may cause an
accident which, for certain gases, may involve serious injury or death.
Confirm the characteristics of the gas to be used, referring to the Material Safety Data Sheet
(MSDS) you obtain from the gas supplier. Wear personal protective equipment if
necessary.
When covering the battery case, be sure not to catch the battery cable in the battery case.
Failure to do so may short-circuit the battery and result in a leakage, production of fire or
explosion.
NEVER throw the battery into fire nor heat it.
Failure to do so may result in an explosion, production of fire and/or serious personal injury.
Observe the instructions given by the battery maker, the national and/or local government
when disposing of the battery.
Exhaust residual gas thoroughly when disposing of the STP pump. If the STP pump is
used for any toxic or reactive gas, always clean the STP pump and dispose of it as industrial
waste in accordance with guidelines given by the national and/or local government.
Residual gas in the STP pump may cause an accident which, for certain gases, may involve
serious injury or death.
Always remove the battery from the STP control unit when disposing of it. Failure to do so
may result in fire or other accident.
2