Filter
Top Products
TROUBLESHOOTING
AND MAINTENANCE
97
10
RAM CHECK
ERROR
Memory check error 1) Memory error • Please contact your local
TOYOTA dealer.
11
INTERNAL COM
ERROR
Internal
communication error
1) Communication error in
the embroidery machine
(ESP9000)
• If this error occurs
frequently, contact your
local TOYOTA dealer.
12
INTERNAL
CONNECT ERR
Internal connection
error
1) Connection error in the
embroidery machine
(ESP9000)
• Please contact your local
TOYOTA dealer.
13
THERMAL
ERROR
High temperature
error
1) Temperature in the
embroidery machine
(ESP9000) exceeded
the allowable limit.
• Keep the power supply
OFF for more than 30
minutes.
14
LIMIT ERROR Limit error 1) The embroidery hoop
has reached the travel
limit in the X- or Y-axis
direction.
• Set the start point of
design correctly.
29
15
BAD NUMBER Wrong design
number
1) When reading the
design data from the
external device, a wrong
design data number was
designated.
• Designate a correct
design data number.
62, 64
16
INSERT DISK Floppy disk was not
inserted.
1) When reading the
design data from the
floppy disk drive, floppy
disk was not set in the
floppy disk drive.
• Insert the floppy disk in
the floppy disk drive.
62
17
CANNOT READ
DISK
Floppy disk read error 1) When reading the
design data from the
floppy disk drive, reading
of the set floppy disk
was not possible.
• Set the floppy disk
(Toyota, Tajima, or ZSK
format) correctly.
The floppy disk or the
floppy disk drive may be
faulty.
18
FILE NOT FOUND Designated file could
not be found
1) When reading the
design data from the
floppy disk drive, the
designated data was not
found in the set floppy
disk.
• Write the desired data to
the floppy disk using the
external device.
No. Error Message Description Cause Corrective Action
Refer
to