Filter
Top Products
48
OPERATION
PROCEDURE
《
《《
《HOOP MENU》
》》
》
HOOP MODE
Sets the embroidery hoop type - flat / cap / sleeve.
1 Change the display to HOOP MENU.
2 Select the type of embroidery hoop.
Setting: FLAT / CAP / SLEEVE
3 Press [SET] to confirm the selection.
4 End of operation
The screen returns to the start-up
screen (the initial screen displayed
when the power is turned ON)
when the hoop mode is set.
Press the SET key to display the
EMB START screen.
***** EMB START ****
AISIN123.10O 1
0/ 1027
01/15: 23456789AB<D>
1
Press .
Select "FLAT", "CAP" or "SLEEVE"
using the following keys:
and (hoop travel keys)
***** HOOP MENU ****
1 HOOP CAP
2.INITIALIZE ON
3.START PNT AUTO
.
***** HOOP MENU ****
1 HOOP CAP
2.INITIALIZE ON
3.START PNT AUTO
.
Press .
** ESP9000 series **
HOOP CAP
INITIALIZE ON