Filter
Top Products
57
OPERATION
PROCEDURE
8 Set the space.
Setting: 0 - 255 mm
SPACE indicates the spacing
between the design data arranged
adjacently.
9 Press [SET] confirm the setting.
10 Press [SET] to return to the EDIT MENU screen.
To edit the design data continu-
ously, set "ROTATE" or "MIRROR"
before pressing the SET key.
11 End of operation
** REPEAT SETTING **
DIR VERTICAL
TIMES 04
SPACE 0 mm
Select "0" ... or "255" using the
following keys:
and (hoop travel keys)
** REPEAT SETTING **
DIR VERTICAL
TIMES 04
SPACE 88 mm
Press .
***** EDIT MENU ****
1 ROTATE 0
2.MIRROR OFF
3.REPEAT [SET]
.
Press .
***** EMB START ****
AISIN123.10O 1
0/ 1027
01/15: 23456789AB<D>
1