Filter
Top Products
54
OPERATION
PROCEDURE
《
《《
《EDIT》
》》
》
DESIGN ROTATION
Sets the angle through which the input design data is rotated.
1 Change the display to EDIT MENU.
2 Select the angle.
Rotation angle can be set in 90°
units.
3 Press [SET] to confirm the setting.
To edit the design data continu-
ously, move the cursor to "MIR-
ROR" or "REPEAT" using
(hoop travel key) and input the
data for "MIRROR" or "REPEAT"
before pressing the SET key.
4 End of operation
FD07
***** EMB START ****
AISIN123.10O 1
0/ 1027
01/15: 23456789AB<D>
1
Press .
For details of design rotation, refer
to Page 80.
Select "0°", "90°", "180°" or "270°"
using the following keys:
and (hoop travel keys)
***** EDIT MENU ****
1 ROTATE 0
2.MIRROR OFF
3.REPEAT [SET]
.
***** EDIT MENU ****
1 ROTATE 180
2.MIRROR OFF
3.REPEAT [SET]
.
Press .
***** EMB START ****
AISIN123.10O 1
0/ 1027
01/15: 23456789AB<D>
1