Filter
Top Products
OPERATION
PROCEDURE
66
DATA SELECT
The following explains the procedure for setting the memory stored design
data as the data for embroidery.
1 Change the display to DATA MENU.
2 Select "2. SELECT DATA".
3 Press [SET] to confirm the selection.
4 Select the design data (Example: FLOWER).
5 Set the data as the embroidery data.
6 End of operation
FD07
***** EMB START ****
AISIN123.10O 1
0/ 1027
01/15: 23-456789A<D>
1
Press .
***** DATA MENU ****
1 INPUT DATA PC
2.SELECT DATA
3.DELETE DATA
.
Move the cursor using (hoop
travel key).
***** DATA MENU ****
1.INPUT DATA PC
2 SELECT DATA
3.DELETE DATA
.
Press .
Select the design data using the
following keys:
and (hoop travel keys)
**** SELECT DATA ***
01/03 AISIN123.10O
STITCH 10713 ST
MEMORY 180876 ST
**** SELECT DATA ***
03/03 FLOWER.10O
STITCH 3972 ST
MEMORY 180876 ST
Press .
***** EMB START ****
FLOWER.10O 1
0/ 3972
01/05: 59AB <D>
1