Filter
Top Products
OPERATION
PROCEDURE
59
NEEDLE BAR SETTING (INPUT)
Sets the needle bar step at the screen.
1 Change the display to COLOR CHANGE.
2 Input the needle bar number (Example: Needle bar No. 11).
To input needle bar numbers con-
secutively, repeat the operation of
"Input the needle number" →
"Input the needle number for the
next step". Press the SET key
after inputting needle number for
all desired steps.
Needle bar Nos. 10, 11, 12, 13, 14
and 15 are indicated as A, B, C, D,
E and F with the LCD on the oper-
ation panel box.
3 Input the needle bar number for the next step.
4 Press [SET] to confirm the setting of needle bar numbers.
5 End of operation
Needle bar
No.
No. 1
…
No. 10 No. 11
Operation
Indication
1
…
AB
FD07
***** EMB START ****
AISIN123.10O 1
0/ 2451
01/04: <D>
Press .
1
+
10
Press the keys in the order of
*** COLOR CHANGE ***
MODE AUTO
01/04:
.
1 0
+
10
1
+
10
123
456
7890
+
10
Select the needle bar number by
pressing the numeric keys.
*** COLOR CHANGE ***
MODE AUTO
02/04:B
Set the needle bar number for
all steps.
*** COLOR CHANGE ***
MODE AUTO
04/04:B57
3
Press .
***** EMB START ****
AISIN123.10O 1
0/ 2451
01/04: 573 <D>
B