Filter
Top Products
28
OPERATION
PROCEDURE
STEPS TO START EMBRODIERY
Example: To input the hoop data using the flat hoop from FDD
(floppy disk drive) (to be purchased separately)
1 Turn ON the power switch at the power supply box.
2 Select "FLAT" for "HOOP" using and (hoop travel keys).
3 Select "ON" for "INITIAL" using and (hoop travel keys).
4 Press the SET key.
5 The screen displays "EMB START". Press the DATA set menu key.
6 For "INPUT DATA", select "335" using and (hoop travel
keys).
7 Press the SET key.
8 Set the floppy disk in which the hoop data is stored to the FDD.
9 Select the hoop data using and (hoop travel keys).
Example: AISIN123
10 Press the SET key.
"335" is a model name of FDD.
** ESP9000 series **
HOOP FLAT
INITIAL ON <D>
Press .
Press .
***** EMB START ****
AISIN 123.10O 1
0/ 1027
01/15: 23-456789A<D>
1
***** DATA MENU ****
1.INPUT DATA 335
2.SELECT DATA
3.DELETE DATA
Press .
**** SELECT FILE ***
1 AISIN123.10O
STITCH 10713 ST
MEMORY 180876 ST
Press .