Filter
Top Products
OPERATION
PROCEDURE
60
NEEDLE BAR SETTING (CHANGE)
Changes the needle bar number of a desired step.
1 Change the display to COLOR CHANGE.
2 Select the step.
3 Input the needle bar number (Example: Changing needle bar No. 2 to
needle bar No. 11)
To change needle bar number for
other steps, repeat the operation of
"Select the step" → "Input the nee-
dle number". Press the SET key
after changing the needle number
for all desired steps.
Needle bar Nos. 10, 11, 12, 13, 14
and 15 are indicated as A, B, C, D,
E and F with the LCD on the oper-
ation panel box.
4 Press [SET] to confirm the setting of needle bar numbers.
5 End of operation
Needle bar
No.
No. 1
…
No. 10 No. 11
Operation
Indication
1
…
AB
FD07
***** EMB START ****
AISIN123.10O 1
0/ 1027
01/99: 23456789AB<D>
1
Press .
Move the cursor to the step where
you want to change the needle bar
number using the following keys:
and (hoop travel keys)
*** COLOR CHANGE ***
MODE AUTO
01/15: 26485179ABCDE
3
1
+
10
Press the keys in the order of
*** COLOR CHANGE ***
MODE AUTO
02/15:3 6485179ABCDE
2
.
1 0
+
10
1
+
10
*** COLOR CHANGE ***
MODE AUTO
03/15:326485179ABDE
Press .
***** EMB START ****
AISIN123.10O 1
0/ 1027
01/15: 26485179AB<D>
3