Filter
Top Products
53
OPERATION
PROCEDURE
OFFSET
Sets if the hoop automatically travels to the offset position.
1 Change the display to HOOP MENU.
2 Change the displayed items.
3 Select "6. OFFSET" (hoop offset).
4 Select the setting.
Setting: AUTO / MANUAL
- AUTO: The hoop travels auto-
matically to the offset
position upon comple-
tion of embroidering.
- MANUAL: The hoop does not
travel automatically.
When OFFSET is
pressed, the hoop
automatically travels
to the preset offset
position.
5 Press [SET] to confirm the selection.
6 End of operation
FD07
***** EMB START ****
AISIN123.10O 1
0/ 1027
01/15: 23456789AB<D>
1
Press .
For details of offset, refer to Pages
73 and 74.
***** HOOP MENU ****
1 HOOP FLAT
2.INITIALIZE ON
3.START PNT MANUAL
.
Press .
***** HOOP MENU ****
4.MANUAL SPD 1
5 HOOP TMNG AUTO
6.OFFSET AUTO
.
Move the cursor using (hoop
travel key).
Select "AUTO" or "MANUAL" using
the following keys:
and (hoop travel keys)
***** HOOP MENU ****
4.MANUAL SPD 1
5.HOOP TMNG AUTO
6 OFFSET AUTO
.
***** HOOP MENU ****
4.MANUAL SPD 1
5.HOOP TMNG AUTO
6 OFFSET MANUAL
.
Press .
***** EMB START ****
AISIN123.10O 1
0/ 1027
01/15: 23456789AB<D>
1