Filter
Top Products
49
OPERATION
PROCEDURE
INITIALIZATION
Sets if initial point is searched for when the power is turned ON.
1 Change the display to HOOP MENU.
2 Select "2. INITIALIZE" (initialization).
3 Select the setting.
Setting: ON / OFF
- ON: When the SET key is
pressed after turning the
power ON, the hoop auto-
matically travels to the start
point.
- OFF:The hoop does not travel
automatically.
4 Press [SET] to confirm the selection.
5 End of operation
FD07
***** EMB START ****
AISIN123.10O 1
0/ 1027
01/15: 23456789AB<D>
1
Press .
***** HOOP MENU ****
1 HOOP FLAT
2.INITIALIZE ON
3.START PNT MANUAL
.
Move the cursor using (hoop
travel key).
Select "ON" or "OFF" using the
following keys:
and (hoop travel keys)
***** HOOP MENU ****
1.HOOP FLAT
2 INITIALIZE ON
3.START PNT MANUAL
.
***** HOOP MENU ****
1.HOOP FLAT
2 INITIALIZE ON
3.START PNT MANUAL
.
Press .
***** EMB START ****
AISIN123.10O 1
0/ 1027
01/15: 23456789AB<D>
1