Filter
Top Products
41
OPERATION
PROCEDURE
SATIN ADJUSTMENT
Sets adjustment of satin stitch width.
1 Change the display to FUNCTION MENU.
2 Change the displayed items.
3 Select "4. SATIN ADJ." (satin stitch width adjustment).
4 Select the setting.
Setting: OFF / 1 / 2 / 3 / 4 / 5
- OFF: Satin stitch width is not
adjusted.
- 1 - 5: 0.1 - 0.5 mm
Satin stitch width is extended on
both sides by the set adjustment
amount.
5 Press [SET] to confirm the setting.
6 End of operation
FD07
***** EMB START ****
AISIN123.10O 1
0/ 1027
01/15: 23456789AB<D>
1
Press .
*** FUNCTION MENU **
1 DISPLAY ST
2.THRED SNS 2
3.BOBBIN CNT [SET]
.
Press .
*** FUNCTION MENU **
4 LOCK ST. So Eo
5.SATIN ADJ. OFF
6.SLOW START 2 ST
.
Move the cursor using (hoop
travel key).
Select "OFF" "1", "2", "3", "4" or "5" of
SATIN AJD. using the following keys:
and (hoop travel keys)
*** FUNCTION MENU **
4.LOCK ST. So Eo
5 SATIN ADJ. OFF
6.SLOW START 2 ST
.
*** FUNCTION MENU **
4.LOCK ST. So Eo
5 SATIN ADJ. 1
6.SLOW START 2 ST
.
Press .
***** EMB START ****
AISIN123.10O 1
0/ 1027
01/15: 23456789AB<D>
1