Filter
Top Products
OPERATION
PROCEDURE
67
DATA DELETION
The following explains the procedure for deleting the design data stored in
memory of the machine.
1 Change the display to DATA MENU.
2 Select "3. DELETE DATA".
3 Press [SET] to confirm the selection.
4 Select the design data to be deleted (Example: FLOWER).
5 Press [CLEAR] to delete the selected design data.
6 Press [SET] to confirm the operation.
7 End of operation
Design data can be deleted contin-
uously. Repeat steps 4, 5, 6 and 7.
To restore the EMB START screen, press the ESCAPE key twice.
FD07
***** EMB START ****
AISIN123.10O 1
0/ 1027
01/15: 23-456789A<D>
1
Press .
***** DATA MENU ****
1 INPUT DATA PC
2.SELECT DATA
3.DELETE DATA
.
Move the cursor using (hoop
travel key).
***** DATA MENU ****
1.INPUT DATA PC
2.SELECT DATA
3 DELETE DATA
.
Press .
**** DELETE DATA ****
01/12 AISIN123.10O
STITCH 1027 ST
MEMORY 180876 ST
Select the design using the following
keys:
and (hoop travel keys)
**** DELETE DATA ****
07/12 FLOWER.10O
STITCH 3972 ST
MEMORY 180876 ST
Press .
**** DELETE DATA ****
DELETE OK ?
[Y=SET,N=ESC]
Press .
**** DELETE DATA ****
07/11 DOG.10O
STITCH 5098 ST
MEMORY 184848 ST