Filter
Top Products
36
OPERATION
PROCEDURE
《
《《
《FUNCTION MENU》
》》
》
CHANGING DISPLAY
Sets the information to be displayed during embroidering - number of stitches
or main shaft speed
[*1]
.
1 Change the display to FUNCTION MENU.
2 Select the desired display mode.
DISPLAY: ST / rpm
3 Press [SET] to confirm the selection.
4 End of operation
*1: Even if you select "rpm", the number of stitches of the design data set for embroidery is displayed while the machine stops.
FD07
***** EMB START ****
AISIN123.10O 1
6/ 1027
01/15: 23456789AB<D>
1
Press .
Select "ST: stitch" or "rpm: number
of revolutions" for "DISPLAY" using
the following keys:
and (hoop travel keys)
*** FUNCTION MENU **
1 DISPLAY ST
2.THRED SNS 2
3.BOBBIN CNT [SET]
.
6/ 1027
Total number of stitches of the design
data set for embroidery
6/ 240 rpm
Present main shaft speed
*** FUNCTION MENU **
1 DISPLAY rpm
2.THRED SNS 2
3.BOBBIN CNT [SET]
.
Press .
***** EMB START ****
AISIN123.10O 1
6/ 1027
01/15: 23456789AB<D>
1