Filter
Top Products
TROUBLESHOOTING
AND MAINTENANCE
93
[When installation from FDD]
1 Detach the switch cover by loosening the screw.
2 Turn ON the DSW2-1 and DSW1-1.
3 Set the program disk.
4 Turn ON the power switch at the power supply box.
If step 4 is performed before step 3
If you insert the program disk after
turning the power switch ON, the
screen as shown below will be dis-
plyed. If this screen is displayed,
press the SET key and continue
operation from step 5.
5 Select the program to be installed.
MAIN: Program related to
CPU
XY: Program related to
drive system
PANEL: Program for operation
Loosen the screw
DIP
switch
Switch
cover
1 2 3 4 5 6 7 8
ON
1 2 3 4 5 6 7 8
ON ON
1 2
3
ON
1 2
3
DSW2
DSW1
Power supply box
****** INSTALL *****
SET KEY FILE SEARCH
****** INSTALL *****
1 MAIN -
2.XY -
3.PANEL -
.
Select the program using the follow-
ing keys:
and (hoop travel keys)
Example: Select PANEL.