Filter
Top Products
34
OPERATION
PROCEDURE
Deleting Design
Memory-stored design deletion
When the SET key is pressed
*Selecting the design
Memory No. / Number of registered designs
Design name
Change the selection with the CLEAR key after
pressing the hoop travel key and .
Number of stitches of memory stored design
Available memory size
*Confirmation for deletion
Press the SET key when Y (yes) or the ESCAPE
key when N (no).
Input Mode
Design input mode
When the SET key is pressed
Mode selection (SINGLE / MULTI)
Change the selection with the hoop travel keys and .
SINGLE: Embroidery is possible without storing the design in
memory
MULTI: Design is input to memory.
Memory Initialization
Memory initialization
When the SET key is pressed
Press the SET key when Y (yes) or the ESCAPE
key when N (no).
3
a
b
c
a
***** DATA MENU ****
1.INPUT DATA PC
2.SELECT DATA
3 DELETE DATA
.
3
**** DELETE DATA ***
01/03 AISIN 123.10O
STITCH 10713 ST
MEMORY 180876 ST
c
b
a
**** DELETE DATA ***
DELETE OK ?
[Y=SET,N=ESC]
a
4
a
***** DATA MENU ****
2.SELECT DATA
3.DELETE DATA
4 MEMORY MODE
.
4
**** MEMORY MODE ***
MEMORY MULTI
3
45
a
***** DATA MENU ****
3.DELETE DATA
4.MEMORY MODE
5 INITIAL MEMORY
.
5
** INITIAL MEMORY **
DELETE ALL DATA OK ?
[Y=SET, N=ESC]
a