Filter
Top Products
OPERATION
PROCEDURE
62
《
《《
《DATA SET MENU》
》》
》
DATA INPUT (FLOPPY DISK)
The following explains the procedure for inputting the design data from floppy
disk to the machine. The input design data is set as the embroidery data.
1 Insert the floppy disk to floppy disk drive.
2 Change the display to DATA MENU.
3 Select "335 (FDD)" for "1. INPUT DATA".
The black square symbol, blinking
on the screen, indicates the
selected item.
"335" is a model name of FDD.
4 Read the floppy disk.
While the floppy disk is being read,
the screen displays the message
as shown below.
5 Select the design data (Example: AISIN 123).
6 Input the selected design data.
Needle bar
No.
1
…
9101112131415
Indication
1
…
9ABCDEF
FD07
***** EMB START ****
AISIN123.10O 1
0/ 1027
01/15: 23-456789A<D>
1
Press .
Select "335" using the following keys:
and (hoop travel keys)
***** DATA MENU ****
1 INPUT DATA PC
2.SELECT DATA
3.DELETE DATA
.
1 INPUT DATA PC.
***** DATA MENU ****
1 INPUT DATA 335
2.SELECT DATA
3.DELETE DATA
.
Press .
FILE SEARCHING
Select the design data using the
following keys:
and (hoop travel keys)
**** SELECT FILE ***
1 AISIN900.10O
STITCH 10713 ST
MEMORY 180876 ST
**** SELECT FILE ***
09/23 AISIN123.10O
STITCH 2451 ST
MEMORY 180876 ST
Press .