Filter
Top Products
OPERATION
PROCEDURE
74
OFFSET (HOOP TRAVELING)
This operation moves the hoop to the offset position and back to the position
located before offsetting.
1 Select OFFSET.
Press the offset key and the hoop
moves to the registered offset
position.
2 Return the hoop back to the previously located position.
The hoop travels back to the posi-
tion before offsetting when you
press the offset key.
CAUTION
When performing this operation, do not put your hands or others
under the needle or on the table.
Otherwise, you could get hurt when the needle or hoop has
moved.
FD07
!
***** EMB PAUSE ****
AISIN123.10O 1
75/ 1027
02/15:1 3456789AB<D>
2
Press .
***** EMB PAUSE ****
OFFSET
Dx + 27.1 (+ 27.1)
Dy - 56.4 (- 56.4)
***** EMB PAUSE ****
AISIN123.10O 1
75/ 1027
02/15:1 3456789AB<D>
2
Press .