Filter
Top Products
52
OPERATION
PROCEDURE
HOOP TIMING
Sets the hoop drive start timing.
1 Change the display to HOOP MENU.
2 Change the displayed items.
3 Select "5. HOOP TMNG" (hoop drive start timing).
4 Select the setting.
Setting: AUTO / 250°
- AUTO:Automatically adjusted
- 250°: The hoop drive starts
always at 250°.
5 Press [SET] to confirm the selection.
6 End of operation
FD07
***** EMB START ****
AISIN123.10O 1
0/ 1027
01/15: 23456789AB<D>
1
Press .
***** HOOP MENU ****
1 HOOP FLAT
2.INITIALIZE ON
3.START PNT MANUAL
.
Press .
***** HOOP MENU ****
4 MANUAL SPD 1
5.HOOP TMNG AUTO
6.OFFSET MANUAL
.
Move the cursor using (hoop
travel key).
Select "AUTO" or "250°"
using
the following keys:
and (hoop travel keys)
***** HOOP MENU ****
4.MANUAL SPD 1
5 HOOP TMNG AUTO
6.OFFSET MANUAL
.
***** HOOP MENU ****
4.MANUAL SPD 1
5 HOOP TMNG 250
°
6.OFFSET 2
.
Press .
***** EMB START ****
AISIN123.10O 1
0/ 1027
01/15: 23456789AB<D>
1