Filter
Top Products
43
OPERATION
PROCEDURE
TRIMMING IN JUMP
Inserts thread trimming to stitches of consecutive jumps.
Thread is trimmed using the con-
tinuous jump signals.
1 Change the display to FUNCTION MENU.
2 Change the displayed items.
3 Select the setting.
Setting: 0 / 1 / 2 / ... / 8 / 9 (ST)
- 0: Does not insert.
Keep pressing or , and the
value changes quickly.
4 Press [SET] to confirm the setting.
When the number of jump signals
appearing in succession reaches
the set value, thread trimming is
inserted.
5 End of operation
FD07
***** EMB START ****
AISIN123.10O 1
0/ 1027
01/15: 23456789AB<D>
1
Press .
*** FUNCTION MENU **
1 DISPLAY ST
2.THRED SNS 2
3.BOBBIN CNT [SET]
.
Press the FUNCTION menu key two
times.
Select "0", "1"... or "9" using the fol-
lowing keys:
and (hoop travel keys)
*** FUNCTION MENU **
7 TRIM JUMP 3 ST
8.JUMP LNGTH 6.0mm
9.TRIM LNGTH 3
.
*** FUNCTION MENU **
7 TRIM JUMP 3 ST
8.JUMP LNGTH 6.0mm
9.TRIM LNGTH 3
.
Press .
***** EMB START ****
AISIN123.10O 1
0/ 1027
01/15: 23456789AB<D>
1