Filter
Top Products
PREPARATION
PREPARATION
22
SETTING THE HOOP TO THE EMBROIDERY MACHINE
1. Attach two holder bases (1) to the joint plate (2) in the direction indicated by symbol and secure them in place
with screws (3).
Determine the holder base (1) attaching position meeting the size of the hoop.
2. Insert the right and left metallic tabs of the embroidery hoop set in the sections A and B in the direction of dashed
line arrows and fix the tabs by engaging the hoop presser springs (4) of the holder bases (1) in the tabs.
Embroidery hoop set
Joint plate (2)
Left hoop metallic tab
Screw (3)
Hoop presser spring (4)
Right hoop metallic tab
Holder base (1)
B
Holder base (1)
A
Hoop presser spring (4)
Screw (3)