Filter
Top Products
OPERATION
PROCEDURE
61
PAUSE SETTING
Sets for pausing of sewing after color change.
1 Change the display to COLOR CHANGE.
2 Select the step.
3 Select the needle bar (Example: Setting pause in needle step 4).
To set the pause for other needle
bar steps, repeat the operation of
"Select the step" → "Select the
needle bar". Press the SET key
after setting the pause for all
desired steps.
4 Press [SET] to confirm the setting.
When the pause is set, "-" is
inserted before the set step.
5 End of operation
FD07
***** EMB START ****
AISIN123.10O 1
0/ 1027
01/15: 23456789AB<D>
1
Press .
Select the step using the following
keys:
and (hoop travel keys)
*** COLOR CHANGE ***
MODE AUTO
01/15: 26485179ABCDE
3
*** COLOR CHANGE ***
MODE AUTO
04/15:326 85179ABCDE
4
Press .
*** COLOR CHANGE ***
MODE AUTO
STOP
04/15:326- 85179ABCD
4
Press .
***** EMB START ****
AISIN123.10O 1
0/ 1027
01/15: 26-485179A<D>
3