Filter
Top Products
56
OPERATION
PROCEDURE
DESIGN REPEAT
Sets the data for defining the pattern to arrange the input design data repeat-
edly.
1 Change the display to EDIT MENU.
2
Select "3. REPEAT" (repeat design data).
3 Press [SET] to confirm the selection.
4 Set the direction.
Setting: HORIZONTAL /
VERTICAL
5 Select "TIMES" (number of repeat times).
6 Set the number of repeat times
Setting: 01 - 99
7 Select "SPACE" (design to design space).
FD07
***** EMB START ****
AISIN123.10O 1
0/ 1027
01/15: 23456789AB<D>
1
Press .
For details of design repeat,
refer to Page
81.
***** EDIT MENU ****
1 ROTATE 0
2.MIRROR OFF
3.REPEAT [SET]
.
Move the cursor using (hoop
travel key).
***** EDIT MENU ****
1.ROTATE 0
2.MIRROR OFF
3 REPEAT [SET]
.
Press .
Select "HORIZONTAL" or
"VERTICAL" using the following keys:
and (hoop travel keys)
** REPEAT SETTING **
DIR HORIZONTAL
TIMES 01
SPACE 0 mm
** REPEAT SETTING **
DIR VERTICAL
TIMES 01
SPACE 0 mm
Move the cursor using (hoop
travel key).
Select "01" ... or "99" using the
following keys:
and (hoop travel keys)
** REPEAT SETTING **
DIR VERTICAL
TIMES 01
SPACE 0 mm
** REPEAT SETTING **
DIR VERTICAL
TIMES 04
SPACE 0 mm
Move the cursor using (hoop
travel key).