Filter
Top Products
OPERATION
PROCEDURE
77
HOOP FORWARD/BACK (n-STITCH FEED)
This operation moves the hoop forward or backward to the input stitch position.
1 Select MODE (n ST).
Setting: 1 / 10 / 100 / C / n-ST
- 1 : 1-stitch unit
- 10 : 10-stitch unit
- 100 : 100-stitch unit
- C : Color-change unit
- n-ST : Numeric-key input stitch
position
2 Input the number of stitches (Example: 356).
If the input number of stitches is
larger than the present number of
stitches, the hoop travels forward
and if it is smaller than the present
number of stitches, the hoop trav-
els back.
3 Move the hoop to the input stitch position.
Pressing the SET key makes it
traveling forward or backward
(hoop travel) to the input stitch
position.
4 End of operation
CAUTION
When performing this operation, do not put your hands or others
under the needle or on the table.
Otherwise, you could get hurt when the needle or hoop has
moved.
FD07
!
Press repeatedly to
select "n", representing the
numeric-key input stitch position.
***** EMB PAUSE ****
AISIN123.10O C
75/ 1027
02/15:123456789AB<D>
123
456
7890
Input the number of stitches using
the numeric keys.
***** EMB PAUSE ****
AISIN123.10O n ST
75/ 1027
02/15:123456789AB<D>
*** FORWARD/BACK ***
AISIN123.10O n ST
* 356/ 1027
02/15:123456789AB<D>
Press .
***** EMB PAUSE ****
AISIN123.10O n ST
356/ 1027
06/15:123456789AB<D>