Filter
Top Products
55
OPERATION
PROCEDURE
MIRROR
Sets the axis of symmetry for reversing the design data.
1 Change the display to EDIT MENU.
2 Select "2. MIRROR" (reversal of design data).
3 Select the axis as the base line for reversing the design data.
Data is reversed symmetrically
around the X-/Y-axis.
4 Press [SET] to confirm the selection.
To edit the design data continu-
ously, move the cursor to
"ROTATE" or "REPEAT" using
(hoop travel key) and input the
data for "ROTATE" or "REPEAT"
before pressing the SET key.
5 End of operation
FD07
***** EMB START ****
AISIN123.10O 1
0/ 1027
01/15: 23456789AB<D>
1
Press .
For details of mirror, refer to
Page 80.
***** EDIT MENU ****
1 ROTATE 0
2.MIRROR OFF
3.REPEAT [SET]
.
Move the cursor using (hoop
travel key).
Select "OFF", "X", "Y" or "XY" using
the following keys:
and (hoop travel keys)
***** EDIT MENU ****
1.ROTATE 0
2 MIRROR OFF
3.REPEAT [SET]
.
X
Y
Reversal around
the Y-axis
Reversal
around the X-axis
***** EDIT MENU ****
1.ROTATE 0
2 MIRROR Y
3.REPEAT [SET]
.
Press .
***** EMB START ****
AISIN123.10O 1
0/ 1027
01/15: 23456789AB<D>
1