Filter
Top Products
HELIX DN9848E Remote Control Software
User Guide
89
B Wireless Card
2 Open your laptop/PC’s Control Panel and locate
and open the Wireless Network Connection Properties
dialogue box. If your wireless card is set up
to use Windows to configure its wireless
systems, a screen similar to that shown left
is presented that has a Wireless Networks
tab. Follow the steps given here to configure
the card.
If the Wireless Networks tab is not
available, please refer to the wireless card
manual for configuration instructions. Make
sure that you use the SSID and WEP key
from the Access Point Configuration.
3 Highlight Internet Protocol (TCP/IP) in the list and
choose Properties to open the Internet
Protocol Properties screen (left). If you are
using DHCP refer to your Access Point
manual for details. Otherwise, select Use the
following IP address and type in an IP Address for
your wireless card using the same subnet
address as your Access Point and laptop.
Click OK to return to the previous screen.
4 Switch to the Wireless Networks tab (left).
Tick Use Windows to configure my wireless network
settings. (The SSIDs of previously added
networks automatically appear in the
network lists.)
5 At the bottom panel, click Add… to open the
Wireless network properties window.
6 Type in the SSID address of the Access Point
and turn WEP on. Set Key Index to 1.
Clear The key is provided for me automatically tick
box to unlock the Network key fields. Type
in and confirm the WEP key as noted in the
Access Point configuration.
7 Click OK to confirm the settings and close the
Wireless Network Connections screen.
continued…