Filter
Top Products
HELIX DN9848E Remote Control Software
User Guide
59
6.5 PEQ Bandwidth or Q Selection
You can choose to display Q (quality factor), defined as the positive ratio of centre frequency to
bandwidth, as a ratio (Q) or as a bandwidth (Oct).
To select PEQ bandwidth or Q
1 From the ELGAR menu, select select Tools > Options > DN9848E.
2 In the System Configuration window, select DN9848 from
the Devices option. If necessary, click on
to the
left of Devices to show the DN9848 option.
3 Select the option you require from the
PEQ Bandwidth or Q drop-down menu, for
example, “Q”.
4 Click OK to select.