Filter
Top Products
HELIX DN9848E Remote Control Software
User Guide
62
To view the channels on a single graph
To view any combination of the channel signals on a single graph, click on either
or on the DN9848 Units Home screen (see section 3.4.3), as
required.
7.2 Dynamics
To switch to an output channel’s Dynamics view
Click
(Dyn.) button on the output channel’s control panel.
The Compressor and Limiter sections are used to set the characteristics, such as hard/soft knee etc.
To switch to another output channel’s dynamic
Click on one of the buttons (just above Compressor/Limiter sections) associated with required
channel, for example,
.