Filter
Top Products
HELIX DN9848E Remote Control Software
User Guide
61
To switch to an output channel’s Parametric Equalisation (PEQ) view
Click (PEQ) on the output channel’s control panel.
The graph shows the combined EQ (black) and the response of the selected PEQ section (red). There
are six output channel PEQ sections, which provide adjustment for frequency, band width (Q) and level.
PEQ sections can also be adjusted on the graph by using the target cursor.
To switch to another channel’s PEQ view
Click on appropriate input/output channel button, just above graph.
To activate a PEQ section
Click anywhere within a channel’s section to activate it. The graph adjusts according to the
new section’s settings. You can now adjust target.
To switch a PEQ section out of the circuit
Set the section’s level to 0.0 dB on the Level control knob.
Target cursor: adjust
frequency and level o
f
selected PEQ section by
dragging the target
Red graph: shows
the response of the
selected PEQ section
Output channel selection
buttons
Black graph: shows
combined EQ
Output channel
set-up section