Filter
Top Products
HELIX DN9848E Remote Control Software
User Guide
20
3.4.1 Memory View screens
The Memory View has three screens, RCS Memories, Unit Memories and Copy RCS Memories, from which you can
manage the system units’ working memory. The screens are described in the following subsections and
operations involving the screens are described in detail within Section 9.
Each input has 32 lockable system memories (System 01 to System 32 for storing standard set-ups),
five free access user memories (User 01 to User 05 for storing set ups for the current show) and one
working memory. Each memory holds a store of 32 packets of memory, numbered from 1 to 32, with
each one corresponding to the 32 available system unit slots.
The working memory contains the current working settings for the system units and is stored in the
current RCS show file.
RCS Memories screen
The RCS Memories screen lets you store/recall the working memory of selected RCS units to/from one of
the system or user memory stores. You can reset working memories, and individual and collective
system and user memories on selected units. The RCS Memories screen also allows you to rename the
working memory on any RCS units. For a full description see Section 9.
Stored Memories list:
memory store locations
(32 system and 5 user)
Select All button: selects
all units in above list
Shows number and
name of currently
highlighted unit and,
below, selected
stored system or use
r
memory numbe
r
Reset Working Memories button:
resets working memories of
selected units to default
Apply button: applies
memory name change
on selected units
Allows you to change
the working memory
name on selected units
Store Working Memory
button: stores working
memory of selected units
in selected memory
Reset Memory button:
resets selected
memory to default
Reset System Memories
button: resets all
system memories to
default
Working Memories list: for
selecting unit(s) from which
working memory is copied
Deselect All button: deselects
all selected units
Reset User Memories button:
resets all user memories
to default
Recall Memory button:
recalls selected memory
to Working Memories list
Locked/Protected
units are identified
by an * in the LC
column