Filter
Top Products
HELIX DN9848E Remote Control Software
User Guide
72
10 MANAGING GROUPS
The Input Groups and Output Groups screens allow you to manage the input and output channels in groups.
You can set up groups, delete groups and edit group names, as required. By grouping input or output
channels that have similar settings, you can save time by setting them up simultaneously instead of
each one individually.
Note Groups that use absolute values have necessary restrictions that affect some management
processes. PEQ groups use absolute values for Frequency and Q, and offsets for level. Filter
groups have absolute values for all parameters except Phase Angle.
To initially access input and output groups in a new show file, you must first type in a password. This
security feature allows you to protect/unprotect your show file group settings any time you wish.
10.1 Security – Grouping Password
Groups are password protected to prevent unauthorised editing of the your input and output groups. To
be able to manage the groups you must first enter a password. We recommend that, the first time you
enter input/output grouping in a new file, you change the password so that your group settings are
protected.
You have to enter a grouping password on initially entering input/output grouping every time you open
a file. Group Locking is set to Locked as default.
To access an input or output group using a Grouping Password
1 Go to an input or output screen by clicking on or in
FastNav
®
.
2 Click on .
3 Type in the group password (default is “password”). If
password is correct the Grouping Password window changes to
the one shown right, while an incorrect password has no
effect.
4 Make sure Group Locking is set to Unlocked, if not, select
Unlocked.
5 Click OK.