Filter
Top Products
HELIX DN9848E Remote Control Software
User Guide
10
3 GETTING STARTED
3.1 Opening HELIX DN9848E RCS within the ELGAR Library
Manager
Note
To run HELIX DN9848E RCS you must have the Midas Klark Teknik ELGAR Library Manager
installed on your laptop/PC. The ELGAR Software and User Guide may be obtained from our
website at www.midasconsoles.com.
Note
To use the HELIX DN9848E RCS to control a processing system, see section 11 for details on
Ethernet connection, setting up and configuration, and section 3.5 for online operation.
HELIX DN9848E RCS runs as an Add-In to the ELGAR Library Manager, which provides a single
management window for various Midas and Klark Teknik remote programming software applications.
By opening multiple Add-Ins within the ELGAR Library Manager you can work on settings for the various
Midas and Klark Teknik devices associated with a show at the same time. For example, you can have a
series of Klark Teknik HELIX DN9848E System Controller Add-Ins to cover your system, plus a Midas
Heritage 1000 Add-In with settings for a H1000 console and a series of HELIX DN9340 Digital EQs.
Furthermore, as the concurrently opened Add-Ins are saved, reopened etc., as a single show file using
the ELGAR File menu commands, you will save time in file management.
To add HELIX DN9848E RCS devices to the ELGAR Library Manager
1 Open ELGAR by double clicking on the ELGAR icon on your desktop.
2 From the ELGAR main menu bar, select Tools >
Add Device > DN9848 E.