Filter
Top Products
HELIX DN9848E Remote Control Software
User Guide
17
3.3 The HELIX DN9848E RCS Workspace
The DN9848 Units Home screen (illustrated below) is the default screen when starting up the HELIX
DN9848E RCS software. The screen comprises a main workspace area with FastNav
®
down the
left-hand side and four buttons along the bottom. The workspace and FastNav
®
area alter according to
FastNav
®
button selection, while the four buttons along the bottom are static.
Five buttons in FastNav
®
emulate the functionality of the HELIX DN9848E. You can open up to 16
HELIX DN9848E units within a single show file, with each one each being allocated a unit bar in
FastNav
®
.
FastNav
®
can display the maximum number of units, that is, 16, and shows them sequentially in
ascending order (top down).
FastNav
®
: contains the five
main menu buttons. A list of
DN9848E units connected to
the system are shown below
DN9848 Units button (DN9848
Units Home screen only)
All Units Online button:
puts all units online
Mute All button:
mutes all outputs
of all units
All Units Offline button:
puts all units offline
Un-Mute All button:
unmutes all outputs
of all units
Close window
button
Main
workspace
Unit bar, see
section 3.3.1
Message bar shows the current
main view and unit selected