Filter
Top Products
HELIX DN9848E Remote Control Software
User Guide
71
9.3 Copy RCS Memories
To copy an RCS unit’s memory to the memories of other RCS units
1 Make sure you are in the Copy RCS Memories screen, press , if necessary
2 Select the RCS unit you are going to copy the
memory from using the Source Unit drop down list,
for example, “05 KLARK TEKNIK DN9848 E”.
3 Select the unit’s source memory from the Source
Memory drop down list, for example, “S06 DEFAULT”.
4 Under Destination Unit(s), tick the RCS units you
wish to copy the source unit’s memory to. To
select/deselect all units click
or
, respectively.
5 Under Memories, tick the RCS unit’s system and/or user
memories you are going to copy the source memory to.
To select/deselect all units click
or
, respectively.
6 Click .
7 Click Yes at the Copy RCS Memory window prompt.
To lock the system memories, refer to section 3.5.3.