Filter
Top Products
HELIX DN9848E Remote Control Software
User Guide
54
5.5 Output Muting on Selected Unit
You can mute/unmute single outputs or all of
the outputs simultaneously on a single unit from
the DN9848 Units Home screen (see section 3.4.3
on page 25):
To mute a single output:
Press
on the output channel’s control panel; button will change to
red (as in diagram above) to show that muting is on.
To un-mute an output:
Press
on the output channel’s control panel; button will revert to
grey background,
, to show that muting is off.
To mute all outputs:
Press
(top of DN9848 Units Home screen); all output channel
buttons will change to , to show that muting is on.
To un-mute all outputs:
Press
(top of DN9848 Units Home screen); all output
channel
buttons will change to , to show that muting is off.